IPM production and storage hall with measurement technology and loading equipment in Gotha
Dynamic load test Cologne

Dynamic load test in Cologne

Drop weight up to 12 t, evaluation per CAPWAP. For Cologne, Bonn and the Rhineland, with own measurement technology and travel distance about 3.5 hours from Gotha.

Method

What the test delivers.

Bearing capacity of several piles within one day, evaluated per CAPWAP. The method per DIN EN ISO 22477-4 delivers shaft friction and base resistance separately and fits where the construction schedule does not allow a week of setup.

Details on the method are on the service page Dynamic load test.

Ground conditions Cologne

Rhenish terrace gravel over tertiary sands and clays, in the surrounding area loess and lignite open-pit mining with dumps and large-scale groundwater lowering. Rising groundwater changes the stresses in the ground over decades.

On dumps and in lowering cones, experience values are worthless because the ground no longer has a naturally grown profile. Settlement occurs there with delay, often years after acceptance.

Process

Dynamic load test in four steps.

  • Expose pile heads, apply transducers
  • Series of blows with drop weight, measure force and velocity
  • CAPWAP model analysis, separation of shaft and base
  • Report with bearing capacity and assessment per EA-Pfähle
Structural design

The structural engineer gets numbers instead of assumptions. Measured bearing capacity allows a proof per Eurocode 7 without blanket safety margins.

Ground

Cologne, Bonn and the Rhineland is geologically inconsistent. The test shows what the pile carries at exactly this spot, not what the ground model would suggest.

Building safety

Differential settlement causes cracks, tilting and re-foundation. Tested piles are the cheapest part of structural stability.

Regional answers

Dynamic load test in Cologne, frequently asked questions

All questions on process, methods, standards and scheduling are in the FAQ section.

Dynamic load test in Cologne

A soil survey and pile concept are enough for a reliable answer. Travel distance about 3.5 hours from Gotha.

Project inquiry

Request a project

Tell us the project, the number of piles and the planned test load. You will receive a test concept with a quote within two business days.